News

  • Common problems and solutions of dodecyl alcohol ester

    Common problems and solutions of dodecyl alcohol ester

    Common problems, causes, and solutions for the application of twelve carbon alcohol esters (alcohol ester-12/C12) 1、 Storage stage issues 1. After adding alcohol ester 12, the coating flocculates, clumps, and breaks down Phenomenon: After dripping, lumps and clumps appear, which cannot be disper...
    Read more
  • Problems encountered during the use of defoaming agents and their solutions

    Problems encountered during the use of defoaming agents and their solutions

    Defoamers can be classified into five categories for troubleshooting in the entire process of production, storage, and construction: insufficient defoaming, excessive defoaming, abnormal storage, defects in construction paint film, and compatibility conflicts.   1、 Foam is not eliminated cleanly...
    Read more
  • Addition method of defoaming agent for water-based paint

    Addition method of defoaming agent for water-based paint

    During the production, mixing, and application of water-based coatings, a large number of bubbles are easily generated due to factors such as raw material ratio, high-speed dispersion, and air entrainment. Many paint manufacturers choose the right water-based paint defoamer, but due to improper a...
    Read more
  • Adding method of water-based paint defoamer

    Adding method of water-based paint defoamer

    During the production, mixing, and application of water-based coatings, a large number of bubbles are easily generated due to factors such as raw material ratio, high-speed dispersion, and air entrainment. Many paint manufacturers choose the right water-based paint defoa...
    Read more
  • Performance and application of acrylate coatings

    Performance and application of acrylate coatings

    This article provides a brief introduction to acrylic resin and conducts an in-depth research and analysis on the performance and application of acrylate coatings. Based on this study, some suggestions and views are presented, hoping to gain a detailed understanding and ...
    Read more
  • Precautions and Solutions for Use of Styrene Propylene lotion

    Precautions and Solutions for Use of Styrene Propylene lotion

    1. lotion freezing and demulsification Phenomenon: Frozen into ice cubes in winter, tofu residue particles and layers appear after melting. Reason: When the temperature is below 0 ℃, the latex particles are frozen and broken.   Solution: 1) The storage environment should...
    Read more
  • Half-yearly Summary of Acrylic Lotion Rising in the First Half and Falling in the Second, with Potential for Low Volatility in the Second Half

    Half-yearly Summary of Acrylic Lotion Rising in the First Half and Falling in the Second, with Potential for Low Volatility in the Second Half

    In the first half of 2026, the acrylic lotion market exhibited a trend of initial increase followed by a decline. Affected by the events in the Middle East in March, raw material prices rose strongly, driving up lotion prices, with the monthly average exceeding the average over the past five year...
    Read more
  • Styrene acrylic emulsion

    Styrene acrylic emulsion

    Styrene acrylic emulsion, commonly known as styrene-acrylic emulsion, is an aqueous emulsion formed by copolymerizing styrene and acrylate monomers. It is mainly used as a film-forming substance in water-based architectural coatings. Due to its high cost-effectiveness an...
    Read more
  • Dispersant for cutting gold and steel wire saws

    Dispersant for cutting gold and steel wire saws

    Diamond wire cutting technology is also known as consolidation abrasive cutting technology. It is the use of electroplating or resin bonding method of diamond abrasive consolidated on the surface of steel wire, diamond wire directly acting on the surface of silicon rod or silicon ingot to produce...
    Read more
  • Dispersant

    Dispersant (Dispersant) is an interface active agent with two opposite properties, both lipophilic and hydrophilic. The solid and liquid particles that are difficult to dissolve in liquid, can also prevent the settlement and condensation of the particles and form the amphiphilic reagent needed fo...
    Read more
  • defoaming agents

    defoaming agents

    Product Introduction : Defoaming agent is a kind of defoaming agent compounded by a special process. Features: widely used in the manufacturing process of all kinds of adhesives used in the adhesive system of defoaming agent, easy to disperse, easy to use. In a wide range of pH and temperature w...
    Read more
  • Types and functions of dispersants commonly used in coatings.

    Dispersant is also called wetting and dispersing agent. On the one hand, it has wetting effect, on the other hand, one end of its active group can be adsorbed on the surface of pigment crushed into fine particles, and the other end is solventized into the base material to form adsorption layer (t...
    Read more