-
Understand once why hydrophobic additives can be hydrophobic
Many people use hydrophobic additives when making coatings, waterproofing, and ink formulations. So why does it make the coating hydrophobic? Core sentence: Hydrophobic additives migrate to the surface of the coating, reducing the surface energy of the coating and making it difficult for water to...Read more -
How to balance hardness, flexibility, and water resistance of water-based polyester resin in amino baking paint?
Core Principle Waterborne polyester amino baking paint belongs to the thermal crosslinking system: carboxyl and hydroxyl groups on the polyester molecular chain undergo etherification crosslinking reaction with amino resins (HMMM, etc.) under baking conditions. Hardness is contributed by crosslin...Read more -
Formation of orange peel coating
Orange peel is a common surface leveling defect that appears on the surface of the coating after coating application, with a concave convex ripple like appearance similar to orange peel. The core essence is that during the curing process of the coating, the leveling speed cannot keep up with the ...Read more -
What is the difference between hydrophobic and hydrophilic gas silicon
Gas phase silicon dioxide (commonly known as gas silicon) is a nano inorganic powder prepared by high-temperature hydrolysis of silicon tetrachloride in a hydrogen oxygen flame. The primary particle size is usually 7-40 nm, and the particles agglomerate to form three-dimensional flocculent aggreg...Read more -
The influence of dispersants on viscosity during grinding of colorants
Why do some have good and some have poor viscosity reduction effects when grinding colorants? The phenomenon does occur frequently when testing dispersants in the laboratory. The exact same formula, using different dispersants, can result in significant differences in viscosity. Some viscosities ...Read more -
Related factors of advection
What factors are related to leveling? According to the paton formula for leveling, leveling time is directly proportional to viscosity, and the higher the viscosity of the coating system, the more difficult leveling will be. Paton also stated that the leveling time is inversely proportional to th...Read more -
What is the reason for paint “biting the bottom”
The first type is biting the bottom of the substrate. Especially for some plastic substrates, which are quite common, such as PS, PC substrates, etc., as well as some foamed plastic equipment, they are easily bitten. The main reason is that our solvents have strong solubility, especially for some...Read more -
What are the types, classifications, and characteristics of substrate wetting agents
The dispersion of pigments involves several processes, and all additives added to the system that can reduce the swelling force of the system and increase the wetting function of the substrate can be used as substrate wetting agents. There are many types of substrate wetting agents, such as non-i...Read more -
What are the causes of shrinkage? How to solve it?
The main reason for shrinkage is the presence of incompatible substances with low surface tension in the paint film of the coating. When there are incompatible substances with low surface tension in the paint film, it is known that the flow of liquid is from areas with low surface tension to area...Read more -
Do we need to add pigment wetting agents to the formula?
Firstly, wetting, in terms of the dispersion of pigments, is actually divided into three steps. The first step of wetting is actually a wetting step. The surface of the pigment is wetted, and it actually adsorbs a lot of air. Whether it is resin, solvent, water, or dispersant carrier, it is neces...Read more -
Key points for selection of anti-corrosion, mildew proof and bactericide (suitable for coating/lotion system)
The selection of anti-corrosion, anti mold and sterilizing agents needs to be comprehensively judged based on multiple dimensions such as application scenarios, system chemical environment, target microbial types, formula compatibility, finished product performance impact, safety regulations and ...Read more -
How to use the difference between BIT and MIT anti-corrosion and anti mold agents
BIT:1, 2-benzisothiazolin-3-one; MIT: 2-methyl-4-isothiazolin-3-one, both of which belong to the isothiazolinone type of in tank preservatives, mainly used for in tank anti-corrosion of water-based coatings, styrene acrylic lotion, adhesives, and inhibiting bacteria and yeast, are not dry film p...Read more



