-
Ammonium Acrylate Dispersant
Dispersant HD5027 is a modified ammonium salt block copolymer with a wide range of dispersion versatility. It can disperse inorganic pigments such as titanium dioxide, iron oxide, calcium carbonate, talc powder, and organic pigments such as red, yellow, and blue. Low addition amount, good stability, can improve the water resistance and gloss of the film;.
-
Sodium acrylate dispersant
Dispersant 5050 high-efficiency coating dispersant is a polycarboxylic acid copolymer sodium salt dispersant, which has excellent dispersibility and the largest pigment bearing capacity. It has excellent dispersibility to titanium dioxide, calcium carbonate and china clay, and the prepared coating has excellent performance. It has strong dispersing power for highly hydrophobic substances such as organic pigments. Application tests show that Dispersant 5040 has the advantages of less dosage, high efficiency, low viscosity, low grinding viscosity, wide dosage range, and good storage stability of the dispersion system.
-
polymeric dispersant
HD -650 is a light yellow ,aqueos dispersant of high grade .its used is paints ,colorants, inks and pigments.this product hepls to Improve gloss and tinting strength, reduce viscosity to a large extent, prevent pigment flocculation, and increase storage stability of the system. It is suitable for dispersion grinding of various systems with or without resin. Does not contain alkylphenol ethoxylates
-
Acrylic liquid thickener
HD935 is an anionic hydrophobic modified alkali swelling association thickener, suitable for all kinds of water-based products, mainly to increase medium and high shear viscosity, with good fluidity, leveling and splash resistance, emulsion phase thickening rate is high, small dosage, good dilution resistance, stable storage, anti-mildew, with good formula applicability. After thickening is very small, the product with the thickening agent has low shear viscosity. Generally stirring 5-10 minutes to reach the final viscosity of more than 90%.
-
PTF thickener
HD103 acrylate thickener is a high content, low viscosity polyacrylic acid emulsion, with emulsifying silicone oil effect, mainly increase low shear viscosity, so it has good thixobehavior, anti-precipitation, small dosage, storage stability, anti-mildew and good formula applicability. Good alkaline resistance, no post-thickening phenomenon, generally stirring 10-20 minutes to reach more than 90% of the final viscosity.
-
Polyurethane thickener
HD420 is an anionic hydrophobic modified alkaline swelling association thickener with high content.Low viscosity products, suitable for a variety of water-based systems, mainly to increase the intermediate viscosity Has good thixotropy, belongs to the high shear viscosity, good water resistance, good leveling. There is a certain fluidity. Pit dilution performance is superior, stable storage.
-
cellulose HPMC
Hydroxypropyl methyl cellulose (HPMC) is a refined cotton as raw material, sodium hydroxide (liquid caustic soda) solution alkalization, chloromethane and propylene oxide. It is then neutralized and etherized, filtered and dried, pulverized, and sieved
-
cellulose HEC
hydroxyethyl cellulose HEC 100000 as a highly efficient non-ionic thickener, water retaining agent and rheological modifier is suitable for various water-based coatings and surface coatings. It has good biological stability.It owns strong resistance to biological and chemical degradation. Due to its non-ionic properties, it has extensive compatibility with emulsion polymers, pigments and fillers, surfactants, emulsifiers, defoamers, preservatives, etc
-
Intumescent fire-resistant ...
Expanding high-temperature resistant fireproof coating is a special functional coating. It can adhere to the surface of the substrate like ordinary coatings at room temperature. However, when exposed to high temperatures or flames, it will rapidly expand and carbonize, forming a thick, foamy heat-insulating layer, thereby protecting the internal substrate and providing precious time for escape and rescue.
-
High elastic sealant specia...
This thickener is professional to produce high elastic glue water, cannot be used for production of coatings, the product 35% solid content, form a strong support for gel, stable, shaping effect and is used in high elastic glue very classic a thickening agent (different from ordinary thickener, increase at the same time increase the viscosity of consistency).It can be adjusted at will according to the thin consistency of fresh glue, convenient and efficient;
-
Corrosion inhibitor Rust in...
For different substrates have a certain effect of flash rust inhibition, suitable for iron, cast iron, carbon steel, alloy steel and other metals, can generate insoluble and dense oxide film with metal, prevent the anode dissolution of metal, thereby inhibiting the corrosion of metal. It has good compatibility with the coating system,
It is an efficient anti-flash rust agent, which does not affect the drying speed of the coating and the adhesion of the coating to the substrate, and can improve the anti-rust performance and salt spray resistance of the coating -
Defoamers，Defoaming Agent
Synonyms in English Defoamers，Defoaming Agent chemical characteristics [Appearance] White viscous emulsion [PH value] 6-8 [Water dilution] diluted in 0.5%-5.0% foaming solution Volatile meaning in Chinese [Stability] No stratification at 3000 RPM /20 minutes Nonionic type meaning in Chinese [Temperature resistance] 130℃ no demulsification, no oil bleaching, no stratification Product introduction and features Defoaming Agent (English name Defoamers, Defoaming Agent) is a kind of auxiliary Age...
