Powdered organic silicon waterproofing agent
| SPECIFICATIONS/CHARACTERISTICS | DATA/VALUE |
| Exterior | White powder |
| Solid content | 99%±1 |
| Silicone content : | 80% |
| PH | 12-13 |
| Flammability: | non-flammable |
1, widely used in roof, internal and external walls, ground, bathroom, kitchen, basement and warehouse waterproof and moisture-proof and reinforced concrete structure rust resistance and penetration;
2, used in underground civil air defense projects: such as culverts, Bridges, DAMS, tunnels, large hydropower stations, water diversion projects to reduce water erosion to prevent weathering;
3, used for a variety of pools: such as swimming pools, clean pools, sewage ponds, water towers, etc.
4, used for high water absorption inorganic aggregates: such as perlite board, roof brick, cement brick, high-rise building lightweight brick veneer, gypsum, inorganic fabric insulation materials, etc., impregnation, so that it has a significant waterproof, moisture-proof effect;
5, used for water-soluble building paint waterproof, protect color, prevent pollution, prevent aging, has been widely used in external wall finish :6, used for latex paint, water glass, 107 adhesive additives, can make it have obvious water increase, and can maintain stable bond strength 7, used in oil drilling, can adjust the mud viscosity and density, can effectively prevent drilling collapse, improve drilling rate;
8. It is used to open the pump at the later stage of the oil well and inject the oil production layer to prevent the collapse of the crust skeleton of the oil production layer, so that the oil production far away from the oil well is relatively smooth: Houfan Hongbao
9, for other special purposes to reduce water absorption and impermeability waterproof.
1, waterproof mortar construction: clean up the base sediment, debris, oil pollution, etc.
The ratio of lime to sand is controlled at 1:2.5--3(32.5R grade and above Portland cement,medium sand, mud content is less than 3%), and the water-cement ratio is less than 0.5. The amount of silicone solid waterproofing agent accounts for 0.4% of the amount of cement, in order to ensure uniform mixing, the silicone solid waterproofing agent should be first mixed with the proportion of mortar cement and sand before adding water to stir. The waterproofcoating is constructed in two layers (each layer is 10mm thick). The bottom layer is first coated with plain mortar 1mm, and then coated with waterproof mortar layer, compacted at the initial setting, and rubbed with a wooden trowel to make a hemp surface: wipe the second layer of waterproof mortar and then compacted with light (if it is necessary to make a hemp surface for decorative construction). According to the normal wine maintenance, the organic silicon solid waterproofing agent and water 1:70 times dissolve instead of water spray wine effect is better. How many squares can the mortar be used, and how many squares can the waterproof effect be.
2. Waterproof concrete construction: The amount of silicone waterproof rust inhibitor accounts for 0.4%-0.5% of the amount of cement, and the construction method of evenly mixed concrete is the same as that of ordinary concrete. In order to ensure uniform mixing, silicone solid water repellent should first be mixed with concrete with a specific amount of cement Mix the sand and stones well before adding water. The number of square can be used in the concrete soil, the waterproof effect can reach how many flat.
3, leakage maintenance construction: the original base smooth surface needs to be chiseled into hemp surface, after cleaning floating ash, do plain mortar combined layer, and then spread waterproof mortar layer is leaking parts must first plugging water. The horns should be rounded and compacted. Stubble should be slope shape (100~150mm width of the stubble) when the first use plain mortar as a bonding layer, and then apply waterproof mortar layer.
4, spraying impermeability construction: silicone solid water repellent agent and 50 times water dilution after spraying on cement surface, brick, tile, gypsum board ordinary paint wall and other water-absorbent inorganic building materials surface for impermeability and moisture treatment, with excellent results. 5, the proportion of waterproof cement: according to 0.5% of the amount and cement mixing evenly packaged. The waterproof cement is used for waterproof plugging and caulking, mixing mortar and foaming cement all have good waterproof and impermeability.
6, the use and dosage of external wall paint, putty powder and the proportion of waterproof cement have good waterproof and impermeable function.
The packaging is 25kg bags. This product should be stored in a ventilated and dry room to prevent
1, the agent in winter construction, can be used with sodium nitrite antifreeze agent.
2, this agent is a general chemical, construction personnel in storage and use should be careful not to splash on the face, especially not splash into the eyes, otherwise immediately rinse with a lot of water or ask the doctor to deal with. During operation, wear protective gloves, protective glasses, and work clothes to avoid contact with skin. This agent is white powder, please pay attention to dust and face protection during construction and operation.
3, the agent will dissolve in water, pay attention to waterproof and moisture-proof during transportation to prevent rain and packaging damage, storage and transportation environment temperature -30~90℃ according to non-dangerous goods transportation method.
