hydrophobing agent
| SPECIFICATION: | VALUE |
| Appearance | Milky liquid |
| Viscosity (25℃, mPa ·s) | 200-500 |
| PH value | 7.0--7.5 |
| Solid content | 40%±1 |
Recommended dosage: Waterborne industrial paint add 0.5%-1.5% to this product; Add 1%-5% to the outer wall latex paint (in the last stage of latex paint mixing)
Section add, stir well can); Finish paint add 1%-3%; Real stone paint can be directly added to 1.5%-5%.
Note: the hydrophobic effect of this product is proportional to the emulsion content, the higher the emulsion content, the better the hydrophobic effect, and the maximum mixing speed of the high-speed dispersion machine does not exceed 600 RPM. Product addition method:
1. In the production stage, it should be added after adding the emulsion and before adding the thickener, and then stir well.
2. After adding, add hydrophobic agent after latex paint, gloss paint and water-based industrial paint, and stir well.
3. Effect test method: It should be tested after the paint film is completely dry, and it can be tested by natural drying. It is soaked in water, dried and tested again for hydrophobic effect
A result. This product has a durable and effective hydrophobic effect on the facade.
Packaging This product is packed in 25L plastic barrel or 200L plastic barrel, or customized according to customer requirements
Storage Store at room temperature (-5°C~40°C), avoid direct sunlightand the shelf life is 1 2 months
