news

The core of PAI (polyamide imide) with strong performance: the main chain is a covalent hybrid structure of rigid imide ring, amide bond, and fully aromatic skeleton, which is not simply blended with PI and nylon, but carries two functional groups on the same molecular chain at the same time

Commercialization representative: Solvay Torlon, Tg ≈ 270-285 ℃, amorphous aromatic high-performance thermoplastic resin

1. Imide five membered ring: the foundation of heat resistance, rigidity, and chemical resistance

Imide ring (- CO-N-CO -) is a closed-loop conjugated heterocyclic ring:

The ring structure is difficult to rotate freely, and the chain segment has extremely strong rigidity. It is not easy to relax or creep at high temperatures, and the modulus and strength remain high around 250 ℃;

High bond energy, antioxidant, thermal decomposition temperature Td generally>450 ℃, oil resistance, resistance to most organic solvents, acids, and hydraulic oils;

The polarity of the ring structure is stable, with good electrical insulation and radiation resistance.

Pure PI (polyimide) has more imide rings and higher Tg, but its disadvantages include difficulty in melt processing, high brittleness, and susceptibility to microcracks.

2. Amide bond (- CONH -): brings hydrogen bonding, toughness, and processability window

The amide bond has strong intermolecular hydrogen bonds, which is a crucial aspect of PAI:

Hydrogen bonding forms a dense physical cross-linking network between molecular chains, directly increasing strength, hardness, wear resistance, and creep resistance;

Compared to pure PI, the amide bond retains a slight degree of rotational freedom for the chain segment, allowing for melt processing (310-340 ℃), unlike many PIs that can only form films in solution or thermosetting;

Hydrogen bonding simultaneously enhances friction and wear performance, with good intrinsic lubrication and low wear, suitable for bearings and seals.

Compared to nylon: Nylon is entirely composed of amide bonds, without imide rings, has a low Tg, and softens directly at high temperatures, resulting in poor creep.

3. Fully aromatic main chain+π – π stacking, further locking chain segments

PAI monomers are generally synthesized from aromatic diamines and trimellitic anhydride, with the benzene ring connected in series on the main chain

π – π stacking between aromatic rings, tightly packed molecules, low coefficient of thermal expansion (CTE), and extremely strong dimensional stability;

Amorphous structure, without crystalline melting peak, will not suddenly collapse before Tg, and has a wide range of continuous use from cryogenic to 260 ℃.

4. The “unique balance” brought about by the superposition of three structures

1. High high-temperature mechanical retention rate: At 260 ℃, the strength and modulus are much higher than PEEK, PSU, and PPS; In many high-temperature conditions, it is a thermoplastic ceiling with high temperature strength;

2. Resilience>PI, heat resistance>nylon: PI is too brittle and difficult to process, nylon is not resistant to high temperatures; PAI is a compromise but highly comprehensive solution;

3. Dense+hydrogen bonding+ring structure: resistant to media, hydrolysis, wear, and low creep simultaneously online;

4. Disadvantages come from the same structure: narrow processing window, extremely high melt viscosity, sensitivity to moisture, and high price; The amide bond will hydrolyze and break in a strong alkaline environment over a long period of time.

5. Supplement related to your coating direction

Solution type PAI resin (enameled wire paint, high temperature resistant coating, insulation paint):

The intermediate in the synthesis is an amino acid, which needs to be thermally imidized to form a closed loop after coating. The degree of closure determines the final heat and solvent resistance;

Insufficient imidization, retaining a large amount of amide acid: poor heat resistance, poor solvent resistance, and inability to improve hardness; Only with sufficient imidization and rigid ring formation can the paint film become hard, resistant to high temperatures, and oil;

The hydrogen bonds in the paint film can also affect rheology: after the solid content is pulled up, the viscosity increases sharply, which is similar to the pigment dispersion, anti settling, and thixotropy problems you encountered earlier (thickening of the hydrogen bond network).

Imide ring lock is heat-resistant and rigid, amide hydrogen bond lock has strength, toughness, and processability, and aromatic skeleton+π stacking lock has dimensional stability; The three work together on the same main chain to create PAI, a special resin that is “hard, wear-resistant, and resistant to media even at high temperatures”.


Post time: Nov-16-2026