news

93% of the gaps in those 7 points are not impurities, but artificial coatings (SiO ₂, Al ₂ O ∝, ZrO ₂+organic treatment agents); 97% of them are mostly basic titanium dioxide particles with few coating/thin coating or even no coating, only with pure TiO ₂ and no post-treatment value.

Pay attention to distinguishing between two easily confused indicators:

TiO ₂ content: the proportion of titanium dioxide itself

Rutile content: The proportion of rutile phase in the crystal (many people mistake 97% rutile for 97% TiO ₂)

1. What is the value of 93% titanium dioxide (high-end models with thick coating)

On the surface of the calcined TiO ₂ single crystal, a dense layer of silicon, aluminum, and zirconium oxides is precipitated, followed by organic surface treatment:

Dense silicon coating: blocking ultraviolet rays, weather resistance, and anti powdering are the core premium points, providing long-term light and color protection outdoors;

Aluminum/zirconium coating: improves wetting, dispersion, and reduces photoactivity;

Organic treatment: matching water-based/solvent/plastic systems to reduce flocculation and color floating;

At the same time, the production end has stricter control over particle size, particle size distribution, and impurities (Fe, V), resulting in smaller batch color differences.

The cost of this coating process is very high. To make a thick coating, the proportion of TiO ₂ is naturally diluted to the range of 92-94%. These high weather resistant grades have TiO ₂ content of around 93%.

2. Why is 97% TiO ₂ actually cheaper

97% are generally thin coated, lightly processed, or uncoated basic titanium dioxide:

Only simple water washing and calcination, with almost no silicon coating on the surface, and a certain amount of aluminum treatment on top;

Without a weather resistant barrier, it is easy to catalyze resin aging and powdering under ultraviolet radiation;

Poor dispersion and high oil absorption, many of which are universal low-end models, filler grade, synthetic fiber extinction, and low-end interior walls;

Its’ high purity ‘is only due to the abundance of TiO ₂ itself, and its pigment application performance is weak.

3. Two anti common sense points

1. Titanium dioxide sells pigment properties (covering, weather resistance, dispersion, color stability), not TiO ₂ purity. The higher the TiO ₂, the better;

2. The same 93%, the difference is also huge: thick and dense silicon aluminum coating (high weather resistance)>thin aluminum coating (universal); Similarly, 97% high-purity bare powder produced by chlorination method and bare powder produced by sulfuric acid method are not the same thing.

Simple selection comparison

93% (thick silicon aluminum zirconium coating): exterior walls, industrial paint, automotive paint, long-term outdoor, expensive, with a focus on weather resistance;

97% (light coating/no coating): interior wall, papermaking, extinction, ordinary filling, cheap, only looking at whiteness coverage, no weather resistance required.


Post time: Nov-20-2026