Solvent based resin: resin molecules truly dissolve in organic solvents (homogeneous real solution)
Water soluble resin (water diluted type): The resin chain carries hydrophilic groups, and after neutralization, it dissolves/colloids in a quasi homogeneous manner, not suspended particles
· lotion (primary dispersion): emulsified monomer first, then polymerized in water, stabilized by adding emulsifier, large particle, milky white
Secondary dispersion: First, the resin is polymerized in a solvent, and then dispersed by phase inversion with water. It is self emulsifying, free of emulsifiers, small in particle size, and semi transparent with blue light
Industry saying: lotion=primary dispersion; Hydroxyacrylic acid dispersion/PUD type=secondary dispersion
1、 Principle, appearance, film formation, advantages and disadvantages of each item
1. Solvent based resin
State: Molecular level homogeneous solution, resin single large molecule dissolved in solvent, transparent
Synthesis: Solution polymerization
Film formation: solvent evaporation → entanglement of molecular chains; Crosslinking type is a reaction between the molecular level and the curing agent, resulting in the most complete crosslinking and the densest paint film ..
Characteristics: ✅ Gloss, fullness, water resistance, salt spray resistance, chemical resistance, substrate wetting, and highest adhesion limit; Wide formula window, good compatibility with phosphate/titanate coupling agents ❌ High VOC, flammable and explosive
Typical: solvent hydroxy acrylic acid, solvent epoxy, solvent PU, alcohol acid
Applicable: high-end industrial topcoat, heavy-duty anti-corrosion coating, metal baking paint
2. Water soluble resin (water dilutable resin)
Many people call it ‘fake water-based’
Status: Neutralization of hydrophilic groups (carboxyl, amino) to form salts, quasi homogeneous system, between true solution and colloid, transparent/light yellow, without obvious particles; Viscosity is highly sensitive to solid content in Chinese universities ..
Synthesis: Solution polymerization introduces hydrophilic groups, neutralizes and dilutes with water
Film formation: evaporation of water and co solvent; Hydrophilic groups remain in the paint film, with naturally high hydrophilicity
Characteristics: ✅ Excellent leveling and substrate wettability close to solvent based; Compatible with amino baking system ❌ Poor water resistance and weak salt spray resistance of the paint film; The system must retain cosolvents with a high VOC content; Low solid content
Typical: water-soluble acrylic acid, water-soluble alkyd acid, water-soluble polyester
Applicable: Low end amino baking paint, wine bottle paint, decorative paint, which are becoming increasingly rare
3. lotion (primary dispersion)
State: Polymer particles suspended in water, multiphase; Particle size 50-500 nm, milky white opaque; Stable by adding emulsifiers/protecting colloids
· Synthesis: lotion polymerization – adding emulsifier in water, dispersing monomer into droplets and then polymerizing, directly making colloidal particles in water in one step
Film formation: Water evaporates, adhesive particles come together, and under the softening of film-forming agents, the particles fuse and aggregate to form a film; The minimum film-forming temperature of MFFT is a key indicator
Characteristics: ✅ Very low VOC, low cost, large molecular weight can be achieved, mature single component self crosslinking scheme ❌ Residual free emulsifiers in the paint film → resistant to water, salt spray, gloss, and color deviation; Easy to bubble and regain moisture; There are many compatibility issues with many adhesion agents
· Typical: pure acrylic, styrene acrylic, silicone acrylic, VAE lotion
Applicable: Building latex paint, color steel single coating, low-end plastic ink
4. Secondary dispersion (water dispersion, mainly composed of PUD and hydroxy acrylic acid dispersion)
State: Polymer particles suspended in water, multiphase; Particle size 5-50 nm, semi transparent with blue light; Self emulsifying, hydrophilic groups grafted onto resin chains without the need for external emulsifiers; Generally, a small amount of residual cosolvent is 3-8%
Synthesis: Solution polymerization: First, prepare resin (with hydrophilic groups such as carboxyl groups) → neutralize with amine → add water to shear phase reversal → remove some solvents under reduced pressure
Film formation: water evaporation, nanoparticle fusion; Most of them are two-component systems (combined with water-based isocyanates), and the crosslinked paint film is very close to solvent based
Characteristics: ✅ No free emulsifier, water resistance, weather resistance, gloss, color development and fullness are far better than ordinary lotion; Fine particle size, good wetting of pigments; Excellent adhesion performance of metal substrate, suitable for combination with phosphate ester adhesion aids ❌ Low molecular weight, mostly dependent on curing agents; Drying is slow; The cost is higher than that of lotion; There is a small amount of residual solvent
Typical: Hydroxyacrylic acid secondary dispersion, PUD polyurethane dispersion, waterborne epoxy dispersion
Applicable: Water based two-component PU topcoat, automotive parts paint, aluminum/galvanized sheet industrial paint, high-end water-based baking paint
Post time: Nov-18-2026



